Welding Fume Extractor


Apzem welding fume extractor units are specifically designed to be utilized as a respiratory safety engineering control during a variety of welding applications including TIG welding, MIG welding, maintenance welding, production welding, clean room welding, stick welding, stainless steel tank welding, rapid location welding, and much more.

Common welding materials are Aluminium, Beryllium, Cadmium, Chromium, Copper, Fluoride, Iron, Lead and Magnesium.Companies are obliged by law to keep welding fumes in the breathing zone of a welder below a certain limit. As welding fumes are potentially dangerous for people’s health, they should be reduced and/or extracted from the area where welding fume collects. Apzem welding fume extractors effectively capture and remove the welding smoke generated by all welding processes. Dangerous welding fumes are captured by powerful fume extractors and removed by activated and specialty impregnated carbon filters.However Apzem fume extractor provide a various constructive material to various advantages like durability etc.

Brushed stainless steel/Powder Coated Mild Steel are the constructive materials provided by Apzem. Apzem type fume extractor filter works on the basis of Reduce fumes, at source capture, Isolation/separation, Ventilation & personal protection.Filtration media options include HEPA, Activated Carbon, and Specialty-blended filter media. Pre filter: 95% at particulate matter size 0.8 microns and HEPA filter 99.99% at particulate matter size 0.3 microns.

Apzem type fume extractor provide source capturing filter to collect the fumes produced when laser is used at any machining operation. Apzem designed the laser fume extractor as containing three chambers as, a pre filter to protect the higher cost, HEPA (High Efficiency Particulate Air) for the finer particulates and finally a gas/chemical filter.

Pre Filter:

The efficiency of the pre filter is directly related to the life of the HEPA in that the more particulates captured in it, the less can pass through and prematurely block the HEPA. Apzem Advantage range of welding fume purification systems has an efficiency of 80% at 0.2 microns and 95% at 1micron. And also it regulates the fume-air flow combination to the next chamber.

HEPA type filter:

HEPA Filter - Up to 99.99% efficient on particles 0.3 microns and larger. Advantage micro filters are positioned within the system in such a way that all the particulates are not only captured but held within the media.

Gas/Chemical Filtration:

Most standard chemical filters are made up of a 50/50 mix of Activated Aluminium Potassium Permanganate and Active carbon. The media neutralizes a broad base of chemicals and VOC (Volatile Organic Compounds) pollutants. Third gas media should be introduced that is specifically designed to absorb and neutralize harmful and extremely corrosive HCL (Hydrogen Chloride) gas.

Apzem Engineers and Consultants will undergo a thorough field study and understands the process, source and the amount of pollutants generated, and its nature and type of pollutants present so as to optimally design the scrubber that would decreases unwanted costs and increases efficiency. These three stages of Apzem fume extraction system provide you a healthy environment.

Technical Specifications

MODEL NO: FW-500,EW-1000,FW-2000

OVERALL DIMENSION: 790*885*1.180

CABINET CONSTRUCTION: Brushed stainless steel/Powder Coated Mild Steel

BLOWER: 1.1kw 380m/hr


PRE FILTER: 95%@ 0.8 microns

HEAP FILTER 99.99% @ 0.3 microns

NOISE LEVEL: ca.70dba

ELECTRICAL: 3*100v/50hz/1*230v/50hz


Blower, filters, pre filter, fine filter, Heap filter, Ducts, flexible duct, Hood, Flexible arm, Carbon filter, spiral Duct, frp duct, ms duct, slide gates

All Apzem Products are designed to comply with ACGIH and OSHA standards as well as local PCB Standards.

Coming Soon...

Coming Soon..

Coming Soon...

All Apzem Products are minimum one year waranted for performance and quality.

Coming Soon...